Table of Contents
Advertisement
Selecting an option
Options can be selected
by touching
the OPTIONS pad. Each
touch
of the pad
advances
the display
to the next option.
There are three options
available:
AIR DRY HEAT DRY and HI
AIR DRY
The AIR DRY option
helps
save
energy,
but the
dishes take longer to dry (overnight).
Some water
spotting
may result. Some items (such as plastics]
may need towel drying.
For best results, use a liq-
uid rinse aid such as Jet-Dry\
HEAT DRY
When HEAT DRY is selected,
the air in the dish-
washer
is heated
during
the "dry" portion
of any
program
- except
RINSE.
HI TEMP
When HI TEMP is selected,
the water for the main
wash and final rinse is heated
to 145°F (63°C). POTS
& PANS has the HI TEMP option
pre-programmed
into it. HI TEMP can not be selected
with RINSE or
CHINA programs.
A Dry Option will show in the display
with HI TEMl?
Be sure to select the desired
Dry Option
(HEAT DRY
or AIR DRY] in combination
with HI TEMP
l
Touch OPTIONS pad until HI TEMP indicators
are
shown in the display.
l
Option
indicators
will not show in the display
if
they cannot
be selected
with a program;
RINSE,
POTS & PANS or CHINA.
l
You can change
an option while the program
is
running
by touching
the OPTIONS pad.
Using PROGRAM MEMORY
The use of PROGRAM MEMORY lets you store the
complete
dishwashing
program
that you most fre-
quently
use.
To set PROGRAM
MEMORY for the first time:
1. Touch PROGRAM MEMORY pad once. The PRO-
GRAM indicator
will show on the display.
2. Select the dishwashing
Program,
Options
and
Delay
Hours. This is done
by touching
the PRO-
GRAM, OPTIONS and DELAY pads.
3. Touch
PROGRAM
MEMORY
pad
a second
time. This enters the selected
Program,
Options
and Delay Hours into the dishwasher's
memory.
NOTE: Each step must be completed
within
15
seconds.
If not completed
in 15 seconds,
the
display
will go blank.
To start
the
dishwasher
using
PROGRAM
MEMORY:
l
Touch START. The dishwasher
will immediately
start. If Delay
Hours are in the Program
Memory,
the dishwasher
will start the delay
count down.
To change
the dishwashing
program
in PRO-
GRAM MEMORY:
1. Touch PROGRAM MEMORY pad
once. The dis-
play
will show the set Program,
Options
and
Delay
Hours (if selected].
2. Touch in the new Program,
Options
and/or
De-
lay Hours you want. NOTE: If you want to cancel
Delay
Hours, the hours must be advanced
to
the blank
that comes
after the 9.
3. Touch
PROGRAM
MEMORY
pad
a second
time. This enters the selected
Program,
Options
and Delay Hours into the dishwasher's
memory.
NOTE: Each step must be completed
within 15
seconds.
If not completed
in 15 seconds,
the
old Program,
Options
and Delay
Hours will re-
main as they were.
In case
of a power
interruption
or failure:
The PROGRAM MEMORY will be erased.
Reset the
PROGRAM MEMORY for the Program,
Option
and
Delay Hours you want.
10
Advertisement
Table of Contents
