Ja4 And J17 (Ethernet A And B Connectors); J6 (Vga Connector); Ja4 And J17 Ethernet A And B Connector Pinout; J6 Vga Connector Pinout - Intel NetStructure ZT 5504 Manual

JA4 and J17 (Ethernet A and B Connectors)

JA4 (Ethernet A) and J17 (Ethernet B) are 8-pin RJ-45 connectors providing both 10 Mbit
(10BASE-T) and 100 Mbit (100BASE-TX) protocols. Two LEDs are located inside each RJ-45
connector:
• Yellow indicates activity
• Green indicates a link
See the "JA4 and J17 Ethernet A and B Connector Pinout" table below for pin definitions.
Ethernet signals can be directed out J3 to the backplane. See

JA4 and J17 Ethernet A and B Connector Pinout

Pin# Function
1 TX+
2 TX-
3 RX+
4 Unused
5 Terminated on ZT 5504
6 RX-
7 Unused
8 Terminated on ZT 5504

J6 (VGA Connector)

J6 is a 15-pin, female, D-shell connector (AMP 748390-6) providing a front panel interface for
VGA signals. See the "J6 VGA Connector Pinout" table for pin definitions.
Video signals can be directed out J5 to an RPIO board. See switch SW2-3.

J6 VGA Connector Pinout

Pin# Signal
1 RED
2 GREEN
3 BLUE
4 NC
5 DGND
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Pin# Signal
6 RGND
7 GGND
8 BGND
9 +5V (fused)
10 SGND
A. Specifications
system register
Pin# Signal
11 NC
12 DDC DAT
13 HSYNC
14 VSYNC
15 DDC CLK
E4h.
62