Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nanoxia Deep Silence 5 Rev. B
Summary of Contents for Nanoxia Deep Silence 5 Rev. B
-
Page 2: Table Of Contents
I. Introduction ________________________________________________________________02 • Specifications __________________________________________________________02 • Accessories ________________________________________________________________02 • Features _______________________________________________________________03 II. Installation Instructions ________________________________________________________06 1. Installation of the motherboard ___________________________________________________06 2. Installation of external drives ________________________________________________07 2.1 Optical drives ___________________________________________________07 2.2 Utilizing the external 3.5 inch bay ______________________________________07 3. -
Page 3: Introduction
I. Introduction Congratulations on the purchase of your new Nanoxia Deep Silence 5 Revision B. We are confident that you will be delighted by your new PC case for many years to come. The Nanoxia Deep Silence series has already won more than 100 awards from the international trade press. -
Page 4: Features
- Nanoxia VentCover (noise indulated): 2 x top cover Noise Insulation The Nanoxia Deep Silence 5 Rev. B has been developed with the aim to offer the buyer a low- noise case, while at the same time allowing for extremely low system temperatures. The sound... - Page 5 The whole concept of sound proofing meets the highest expectations. Ventilation System The Nanoxia Deep Silence 5 Rev. B has an integrated ventilation system consisting of three 140 mm Deep Silence fans and a built-in 2-channel fan controller. A total of up to six fans can be mounted.
- Page 6 Watercooling-ready The Nanoxia Deep Silence 5 Rev. B has been prepared for the installation of a water cooling system. Therefore you can install radiators or a compact water cooling solution under the top cover as well as behind the front panel.
-
Page 7: Installation Instructions
II. Installation Instructions 1. Installation of the motherboard You can mount E-ATX, XL-ATX, ATX, M-ATX and Mini-ITX motherboards in the Deep Silence 5 Rev. B. In order to ensure an easy installation of your motherboard, we suggest the following procedure: Please consult the following charts to find your motherboard form factor. -
Page 8: Installation Of External Drives
3. Installation options of HDD’s The Deep Silence 5 Rev. B allows you the decoupled mounting of 14 hard disk drives. A total of 11 x 2.5/3.5 inch bays are available. Included is the newly developed 6 x 2.5 inch mounting frame, which will take three 3.5 inch bays for installation. -
Page 9: Mounting Of Hard Disk Drives
3.1 Mounting of hard disk drives Install the 2.5 or 3.5 inch hard drives in the illustrated mounting frames. In order to extract the frame, squeeze the protruding brackets and pull the slide out gently. To install a hard drive into a bracket insert the disk so that the connectors point to the back and attach the hard drive using the screws provided For the fitting of 3.5 inch hard drives For the fitting of 2.5 inch hard drives... -
Page 10: Utilizing The 6 X 2.5 Inch Mounting Frame
If you want to remove the lower hard drive cage in order to install a water cooling radiator, simply loosen the 8 screws holding the cage to the chassis. First remove the front panel (see chapter Next loosen the four screws securing the HDD cage to the front panel. Finally, remove the four screws at the bottom of the case which allow the cage to be removed. -
Page 11: Removing The Front Panel
vertically in the frame and secure them on both sides with the 2.5 inch mounting screws (long). Then push the frame with the hard drives into the HDD cage in the position you prefer. If you plan to put the frame in the additional 3-bay HDD-cage, we recommend connecting the SATA power and data cables, before pushing the mounting frame back into the cage and then guide the cables through the appropriate cable guides in the motherboard tray. -
Page 12: Fan Assembly
Three 140 mm fans are pre-installed in your case. You can mount up to six fans in total. We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately. These are technically and visually equivalent to the factory-installed case fans and will work in perfect harmony with the built-in fan control of your case. -
Page 13: Fans Under The Top Cover
5.2 Fans under the top cover If you want to install additional fans at the top of the case, please remove the Nanoxia VentCovers first by removing the screws on the outside of the case. Next, hold the fans from the inside and secure them to the top by fastening the screws from the outside. -
Page 14: The 2-Channel Fan Control
(fan rear side facing inwards). 6. The 2-channel fan controller The Deep Silence 5 Rev. B is equipped with a 2-channel fan control for up to six case fans. You can operate up to three fans per channel. -
Page 15: Operation Of The Fan Control
B. 7. Installing a water cooling solution In Nanoxia Deep Silence 5 Rev. B you can install radiators or compact water cooling systems both behind the front panel and under the top cover. We recommend the installation of the radiator behind the front panel. -
Page 16: Installation Of A Radiator Or Compact Water Cooling Under The Top Cover
Finally, reinstall the fans. For maximum cooling performance, you can also mount additional fans on the back of the radiator. Radiator Radiator with 2 fans with 4 fans mounted mounted 7.2 Installation of a slim radiator or com- pact water cooling solution under the top cover Under the top cover, you can install in a 240/280 mm slim radiator. -
Page 17: Support
For general inquiries, comments, suggestions and the like please refer to: info@nanoxia-world.com We are sure that you will be satisfied with Nanoxia Deep Silence 5 Rev. B for many years to come, so please enjoy your new PC case. Your Nanoxia Support-Team... - Page 18 © Nanoxia 2015...