Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Nanoxia CoolForce 2
Summary of Contents for Nanoxia CoolForce 2
-
Page 2: Table Of Contents
6.1 Fans in the case front __________________________________________________10 6.2 Fans under the top cover _______________________________________________10 6.3 Fan at the bottom of the case ___________________________________________10 6.4 Fan on the Nanoxia ModuWand _________________________________________11 7. The 3-stage fan controller _________________________________________________12 7.1 Connecting the fans to the fan control ____________________________________12 7.2 Operation of the fan control... -
Page 3: Introduction
PC case for many years to come. The CoolForce 2 is the first model of our new case series, which offers an almost unbelievable variety of features at an outstanding price-performance-ratio. The silent-optimized tower is of the highest quality and combines optimum functionality with a high degree of variability. -
Page 4: Features
- Tool-free mounting of optical drives - 8 slots for expansion cards - Max. VGA length 300 mm (up to 430 mm with Nanoxia ModuWand removed) - Room for CPU coolers with a maximum height of up to 185 mm... -
Page 5: Installation Of Optical Drives And Removal Of The 5.25 Inch Cage
PSU at the back of the motherboard-tray. 2. Installation of optical drives and removal of the 5.25 inch cage You can install up to two external drives 5.25 inch drives in the CoolForce 2. 2.1 Installation of optical drives To install optical drives, please remove both side panels. The installation of optical drives requires neither screws nor tools. -
Page 6: Removal Of The 5.25 Inch Drive Bay
3. The Nanoxia ModuWand One of the main features of the CoolForce 2 is the Nanoxia ModuWand. It allows the installation of hard disk drives, fans, reservoirs, or pumps for a water cooling system. The Nanoxia Modu- Wand can be removed for the installation of extra-long VGA-cards. -
Page 7: Installation Options Of Hdd's
4. Installation of hard drives You can mount up to six 2.5 inch SSD as well as up to four 3.5 inch HDD in the CoolForce 2. 4.1 Mounting of hard disk drives in the 2-bay HDD-cage Install the hard drives in the illustrated mounting frames. In order to extract the frame, squeeze the protruding brackets and pull the slide out gently. -
Page 8: Utilizing The 2.5 Inch Mounting Plates
4.3 Utilizing the 2.5 inch mounting trays Your CoolForce 2 comes with four 2.5 inch mounting trays, which have been specifically designed to hold SSD drives. In order to mount an SSD on the tray, first remove the thumbscrews that holds the tray in place and then the 2.5 inch tray. -
Page 9: Utilizing The Moduwand For The Installation Of Hard Disks
To remove the front panel, simply hold the cutout at the bottom of the front panel and pull it towards you with a firm tug. Please be careful not to damage the cables of the Nanoxia Rigid LED bar behind the front. -
Page 10: Fan Assembly
You can, of course, connect the additional fans to the fan controller (see chapter 7.2). Front and bottom of the CoolForce 2 are equipped with easy to clean dust filters. We recom- mend that you clean them on a regular basis. -
Page 11: Fans In The Case Front
CoolForce fans (1,100 rpm) are preinstalled. 6.2 Fans under the top cover If you want to install more fans at the top of the case, please remove the Nanoxia Air-Cover (see chapter 5.2). Then hold the fans from the inside and secure them to the top by fastening the screws from the outside. -
Page 12: Fan On The Nanoxia Moduwand
(see chapter The ModuWand offers mounting holes both for 120 and 140 mm fans; install the fans accordingly and put the Nanoxia ModuWand back into the case. Please note that installing fans on the outer side of the ModuWand will limit the available space for the installation of long VGA cards. -
Page 13: The 3-Stage Fan Controller
8. The Nanoxia Rigid LED Bars Behind the front of your CoolForce 2 case two green-lit Nanoxia Rigid LED Bars are pre-installed. 8.1 Connecting the Rigid LED Bars to the power supply The Rigid LED Bars are powered by a 3-pin Molex connector that can be connected directly to... -
Page 14: Operation Of The Rigid Led Bars
9. Installing a water cooling solution In the CoolForce 2 case, you can install 240 mm radiators behind the front panel as well as either 120 mm, 240 mm or 360 mm radiators under the top cover. -
Page 15: Installation Of A Radiator Or Compact Water Cooling Under The Top Cover
9.2 Installation of a radiator or compact water cooling solution under the top cover For the installation of the radiator under the top cover, please use the laterally offset mounting holes. These special mounting holes ensure the best possible compatibility with current motherboards. -
Page 16: Support
For general inquiries, comments, suggestions and the like please refer to: info@nanoxia-world.com We are sure that you will be satisfied with Nanoxia CoolForce 2 for many years to come, so please enjoy your new PC case. Your Nanoxia Support-Team... - Page 17 © Nanoxia...