Heat Dryor Air Dry; To Add A Dish After Starting - Whirlpool DP3801XL Use & Care Manual

Cycle Control Knob
Selecting a cycle
NORMAL HEAVY Cycle
A double wash for normal to heav-
ily soiled loads. (The Energy Guide
Label data is based on this cycle.]
Cycle time is about 60 minutes.
NORMAL LIGHT Cycle
For normal, everyday soiled loads.
Cycle time is about 55 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time
is about 10 minutes.
Use AIR DRY only.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the
dishwasher is heated during the "dry" part of
the cycle.
If the AIR DRY Option is selected, air in the
dishwasher is not heated, Using this option helps
save energy but dishes take longer to dry [over-
night] and some water spotting may result.
Some items (such as plastics) may need towel
drying.
Open the door long enough for steam to es-
cape. Close the door to allow the Cycle Control
Knob to complete its cycle.
To add a dish after starting
4. Close the door. Do not latch it. Wait 30 sec-
1. To be sure the added item is washed and
onds for air in the dishwasher to warm up.
rinsed, make sure the Cycle Control Knob
This helps reduce the amount of moisture
has not passed NORMAL LIGHT. that can come from the vent when restart-
2. Unlatch the doorto stop the cycle, but don't rng the cycle.
open it until the spray arms stop spinning. 5. Latch the door, The dishwasher will Start
3. Open the door and add the dish.
from where it stopped.