HAR-D1000
6-5. SCHEMATIC DIAGRAM – BD SECTION –
(Page29)
• See page 22 for Wavefoms.
Note on Schematic Diagram:
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : CD STOP
(
) : CD PLAY
26
26
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Printed wiring board of BD board is shown only for refer-
ring, because CD base unit is replaced as a block.