Selecting Cycle Options; Changing A Cycle Or; An Option Setting - Whirlpool 960 Series Use And Care Manual

Selecting cycle option
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press Air Dry any time
before the Drying indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses
the same options in the next wash cycle
unless new options are selected or the
Cancel/Drain pad is pressed.
High Temp Wash
When High Temp Wash is selected, the
iiiii
dishwasher heats the water
during the main wash of the
Low Energy/China, Normal, and
Heavy cycles. Heating the water
helps improve washing results.
The Pots-n-Pans cycle automatically
uses High Temp Wash.
S
Low Energy Rinse
When Low Energy Rinse is selected,
the dishwasher does not heat
the water during the final rinse
of Low Energy/China, Normal,
Heavy, and Pots-n-Pans cycles.
NOTE: Low Energy Rinse saves energy, but
dishes take longer to dry and some spotting
can occur. For best rinsing and drying
results, use a liquid rinse agent.
Air Dry
When Air Dry is selected, the air in the
iii
dishwasher is not heated during
the "dry" portion of a cycle. Using
Air Dry helps save energy, but
. ,.
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
During the first minute
Changing a cycle or an
of a cycle
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
option setting
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
"dry" portion of the cycle unless you select
Air Dry.
After the first minute
of a cycle
1. Press Cancel/Drain. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
3. If desired, press one or more Option
pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
15