Using Cancel/Drain; Selecting Cycle Options; Changing A Cycle Or An Option Setting - Whirlpool 925 series Use And Care Manual

Press CaeceltDrain tocancel a cycleor
clearoption selections.
* You can press Cancel/Drain again to stop
[he drain irnmediately. Remember to drain
the dishwasher again before starting a
new cycle.
To cancel a cycle:
• Press Cancel/Drain while the dishwasher
is running to start, a 2-minute drain. It will
take a few seconds for the drain to start. If
desired, select a new cycle. (See the
"Changing a cycle or an option setting"
section.)
NOTE: A small amount of water remaining
in the dishwasher is normal.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.
31;i@¸ iiii C:iiiii:iiii iiii!s !!!!iiiiiiiii :iiiii iiiii iiii:iiiq:iiiii O, i ;;i ¸iiii :iiii;i
You can press an Option pad after the
dishwasher sl:ar[s as long as the cycle is
not past the point that the option is used.
For example, you can press Air Dry any
time before the Drying indicator glows.
After a wash cycle, the dishwasher remem_
hers the options used and uses the same
options in the next wash cycle unless new
options are selected or the Cancel/Drain
pad is pressed.
POWER SCOUR*
(on some models)
When POWER SCOUR is selected the dish-
washer heats the water during
several portions of the Normal,
Heavy, and Pots-N-Pans cycles.
Heating the water helps improve
washing results. The Pots-N-
Pans cycle, with POWER SCOUR is
recommended for baked-on soil.
High Temp Wash
(on some models)
When High Temp Wash is selected, the
dishwasher heats the water to
!40°F (60°0) during the main
wash of the Low Energy,
China, Normal and Heavy
cycles. Heating the water helps improve
washing results. The Pots-N-Pans cycle
automatically uses High Temp washes.
SANI RINSE*
(on some models)
Selecting the SAN! RINSE option raises the
water temperature in the final
rinse to 150'_F (65"C). SANI
RINSE is an option with the
Pots-.N-Pans. Heavy, Normal,
Low Energy and China cycles. Depending
on the incoming temperature of your water,
cycle times rnighL be longer when you select
SANI RINSE.
NOTE: SANI RINSE raises the temperature
of the final rinse to 150°F (65_C), and main-
tains that temperature 9 minutes. This high
temperature rinse sanitizes your dishes and
glassware.
Air Dry
When Air Dry is selected, the air in the
dishwasher is not heated during
the "dry" portion of a cycle. Using
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur. Some items (such
as plastics) may need towel drying For best
dQ!ing, use a liquid rinse agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the "dry"
portion d the cycle unless you selecl Air Dry.
16