Setting The Controls; Selecting A Wash Cycle - Whirlpool 960 Series Use And Care Manual

Setting the Controls
Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless
you
select the delay wash cycle. You may press Option pads as the machine is filling.
CYCLE
RlNSEiWASH LATER
For rinsing a few items to
be washed one or more
days later.
l
Do not use detergent.
l
Water is not heated
during Rinse/Wash Later.
l
Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for prerinsed
or lightly soiled loads.
l
Select High Temp Wash
to heat water in the main
wash (marked +).
l
The water heats to 140°F (60%)
in the final rinse (marked++) unless
you select Low Energy Rinse.
T
A 'v' shows what each cycle includes
NORMAL
.
to heat water in the main wash
(marked f).
l
The water heats to 140°F (60°C)
in the final rinse (marked++) unless
you select Low Energy Rinse.
IINSE
vlAlN
I/ASH
01
et
UNSE
INAL
IINSE
.
d-t
d-t
-
)RY
-
CYCLE
TIME
Minutes:
12
60*
66'
continued on next page
13