Selecting Cycle Options; Changing A Cycle Or Option Setting - Whirlpool SERIES 940 Use And Care Manual

Selecting cycle options
You can press an Option pad after the dish-
washer starts as long as the cycle has not
passed the point that the option is used.
For example, you can press Air Dry any
time before the Drying indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the Cancel/
Drain pad is pressed.
High Temp Wash
When High Temp Wash is selected, the dish-
Iii
washer heats the water during the
main wash of the Low Energy/
China, Normal, and Heavy cycles.
Heating the water helps improve
washing results. The Pots-N-Pans
cycle automatically uses High Temp Wash.
Air Dry
When Air Dry is selected, the air in the
iii
dishwasher is not heated during
the "dry" portion of a cycle. Using
. ,.
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
"dry" portion of the cycle unless you select
Air Dry.
Changing a cycle or option setting
After the first minute
of a cycle
1. Press Cancel/Drain. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
3. If desired, press one or more Option
pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
15