Table of Contents
Advertisement
CYCLE
WASH
HEAVY
l
The water heats to 140°F (60%) in
the final rinse (marked ++) unless
you
select Low Energy Rinse.
POTS-N-PANS
(marked +).
l
The water heats to 140°F (60°C) in
the final rinse (marked ++) unless
you select Low Energy Rinse.
T
A "@" shows what each cvcle includes
.
et
IINSE
.
.
MAIN
YASH
l t
#INSE
INAL
IINSE
l tt
@t-t
l
.
CYCLE
TIME
Minutes)
76.
76*
l
Cycle time includes dry time and may be longer depending on the temperature
of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
Using
Cancel/Drain
Press Cancel/Drain
to cancel a cycle or to
clear the indicators.
To clear
the indicators:
Press Cancel/Drain
before starting
the dishwasher
to clear all cycle and option
selections.
To cancel
a cycle:
l
Press Cancel/Drain
while the dishwasher
is running to start a 2-minute
drain. It will take a few seconds for the
drain to start. If desired, select a new
cycle. (See "Changing a cycle or an
option setting" on page 15.)
l
You can press Cancel/Drain
again to stop
the drain immediately.
Remember to drain
the dishwasher
again before starting a
new cycle.
NOTE: A small amount of water remaining
in the dishwasher
is normal.
14
Advertisement
Table of Contents
