Installing The Canopy; Installing The Blades - Hunter Valda Installation Manual

1886
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades

Note:
Fan style may vary.
Hanging Fan Wiring
Insert the two canopy screws
found in the
Insert the blade into the blade slot around the
center screw. Put the blade washers found in
the hardware bag onto the blade screws
found in the hardware bag. Then install
the blade screws to secure each blade to
the fan.
Repeat x3
Canopy Blades
hardware bag.
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
bag
bag
Light Bulbs Remote
x2
Canopy Screw
x6
Blade Screw
x6
Blade Washer
Remote Cradle