Advertisement
Changing cooktop modules
Make
sure all controls
are OFF and the cooktop
parts
are cool
before
removing
them.
Surface burner
modules
Surface
burner
module
will work on either side of the cooktop.
Or,,,cet
Venturi
1.
To remove,
liftzff
\
surface
grates.
2.
Lift slightly
the
handle.
3.
With both
hands,
pull
module
to-
ward you to clear
orifices.
Lift out.
1.
To replace,
line
up the
venturi
with
the
burner
orifices.
Grill
module
2.
Push the module
until
it's seated
properly.
3.
Lower
front
with
the handle.
4.
Install
"surface
grates.
Grill module
will work on the right side of the cooktop
only.
A
1.
To remove,
lift off
2.
Lift front
end
of
3.
With both
hands,
- 4.
Lift out the grease
grills.
burner
pan
and
lift burner
pan out
pan,
being
care-
pull toward
you.
and set aside.
ful not to spill fat
drippings.
1.
To replace,
insert
2.
Line up the venturi
the grease
pan.
with
the
burner
place
while
low-
burners.
Do not use the grill
orifices.
ering burner
pan.
module
unless the
grease
pan
is in
All grill parts must be cleaned
after each use to avoid
excessive
smoke,
8
place.
flate-ups,
fat spoilage
and odors. See page
13.
Advertisement
