Recommended Installation Position On Rear Windscreen - Pioneer VREC-DH200 Owner's Manual

Recommended Installation Position on Rear Windscreen

When installing this product on the rear windscreen, installation in a vehicle and in a position that
satisfies all of the following conditions is recommended.
• A position where the lens part of this product is within the wiping range of the wiper.
• A position where this product faces in the horizontal direction to the rear and to the sides.
• A position where the lens part of the product and the double-sided tape do not overlap the heating
wires.
• A position where cables can be routed without unnecessary force.
1 Clean the installation area of dirt and oils using the included cleaning cloth.
Front windscreen
2 Install the GPS unit on to this product.
Align the tab on the GPS unit and the groove on this product, check that the terminals are aligned,
then install by firmly pressing until it clicks.
CAUTION
Do not exert undue force when the terminals are not aligned. Doing so may cause damage.
Rear windscreen
Heating wires
Wiping range of the rear wiper
Rear windscreen
Terminals
− 16 −
Power cable
This product
Tab
Groove