Using This Product; This Product Power; System Indicator Display - Pioneer VREC-DH200 Owner's Manual

Using this product

Before using this product, first stop the vehicle in a safe location and apply the handbrake.

This product Power

This product starts when the vehicle's engine is turned on (ACC ON), and it automatically starts
recording. (Video recording) →
CAUTION
When the internal battery is empty or has insufficient charge (insufficient charging, power used up, etc.),
then when starting the vehicle engine, the product may not start. If this product does not start, then wait
approximately 3 minutes with the product charging, then remove and reinsert the cigarette socket USB
charger plug from the vehicle cigarette socket to restart this product.
Manually Turning the Power On and Off
When power is not supplied to this product (vehicle engine is turned off (ACC OFF)), you can manually
turn the power on and off.
1 Press and hold
The power will turn on.
2 Press and hold
Power will turn off, and the system indicators will go out.
Notes
• When power is supplied to this product, you cannot manually turn the power on and off.
• When parking mode is set to be on, this will still operate even after manually turning the power off.
→
"This Product Settings" - "Device settings" - "Parking sensitive"
Guide to Charging Time
It takes approximately three hours to charge a flat battery.

System Indicator Display

The operating status of this product is displayed with the system indicator.
System Indicator
Illuminated green
Illuminated red
Blinking red
"Using this product" - "Video Recording"
for 2 seconds or more.
for 2 seconds or more.
Video Recording
○
―
―
− 23 −
Recording Event
―
○
―
Error Has Occurred
(Including microSD Card
not Inserted)
―
―
○