Recommended Installation Position On Rear Windscreen - Pioneer VREC-Z710SH Owner's Manual

Recommended Installation Position on Rear Windscreen

For installation on the rear glass, a 2nd camera (sold separately) is required. If installing only this
product, then skip the instructions regarding installation on the rear glass.
When installing the 2nd camera (sold separately) on the inside of the rear window, installation in a
vehicle and in a position that satisfies all of the following conditions is recommended.
• A position where the lens part of the 2nd camera (sold separately) is within the wiping range of the
wiper.
• A position where the 2nd camera (sold separately) faces in the horizontal direction to the rear and
side to side.
• A position where the lens part of the 2nd camera (sold separately) and the double-sided tape do not
overlap the heating wires.
• A position where the 2nd camera (sold separately) connection cable can be routed without
unnecessary force.
1 Clean the installation area of dirt and oils using the included cleaning cloth.
Front windscreen
2 Install this product.
① : Set the mounting bracket on the main unit.
② : Peel off the double-sided tape release paper from the mounting bracket.
③ : Install at the specified position of the front windscreen.
Rear windscreen
Heating wires
Wiping range of the rear wiper
Rear windscreen
2
1
①
− 18 −
Connection cable
2nd camera
(sold separately)
Front
Windscreen
3
Firmly push
this product.