Video Recording; Event Recording - Pioneer VREC-DH200 Owner's Manual

Video Recording

Recording automatically starts when this product is started. The recorded video is saved to the
microSD card as single, 3 minute files in the "NORMAL" folder, and when the microSD card runs out of
free space, the files are overwritten starting from the oldest file.
Notes
• Video recording will stop under the following circumstances.
— When in event recording mode
— When the power supply is stopped
— When parking mode has started
— When an error has occurred in the SD card
— When an error has occurred in this product
— When using the exclusive app to view files stored on a microSD card inserted into the product
*1 Even if the power supply to this product is interrupted, you can continue with video recording by
setting a shutdown time.
*2 When viewing is completed, video recording (for 3 minutes) starts again approximately 10
seconds later.

Event Recording

Automatic Recording by Detecting Impacts (Event Recording)
The continuous video file when an impact is detected by this product, such as an impact with another
vehicle, is automatically saved for the 2 seconds before and 10 seconds after the moment of detection as
an event video file to the "EVENT" folder.
Start of recording
Video
recording file 1
After event recording is completed, video recording (for 3 minutes) starts again.
*1
2 seconds before, 10 seconds after
Event video file
Video
recording file 2
Impact detected
− 24 −
Video
recording file 3
*2