Troubleshooting - Pioneer VREC-DH200 Owner's Manual

Troubleshooting

Check the following information before sending the product in for repairs.
Symptom
An error occurred during the
operation of the this product.
A file that should have been
saved cannot be found.
The product makes parking
mode files when you get in and
out of the vehicle.
There are many videos where
nothing happens in the files
recorded while parked.
My vehicle was hit while parked,
but a video file wasn't recorded.
An accident occurred during
driving, but a video file wasn't
recorded.
There's no sound when I play a
video file.
Cause
The microcomputer in this
product is malfunctioning.
If there is insufficient space in
the storage areas of the microSD
card, the files will be overwritten
in order from the oldest files.
The shutdown time is set to
[Shutdown rightaway].
The vibration when people get in
and out of the vehicle and the
movement of people are being
detected.
The sensitivity of impact
detection may not be
appropriate.
Look in the "NORMAL" video
recording file storage folder.
The microphone setting may be
OFF.
− 31 −
Action
Press the reset button.
We recommend that you back up
any important files you want to
keep.
→
" Backing Up Recorded
Files"
Adjust the shutdown time.
→
"This Product Settings" -
"Device settings" - "Delay
shutdown"
Adjust the sensitivity of the
sensors to use for detection.
→
"This Product Settings" -
"Device settings" - "Parking
sensitive"
Event video files are saved to the
"NORMAL" folder, not the
"EVENT" folder.
→
"Backing Up Recorded
Files"
Check the microphone settings
again.
→
"This Product Settings" -
"Device settings" -
"Microphone"