Ricoh JP5000 Service Manual page 222

1 July, 1998
F: Cover bracket
G: Cutter unit
NOTE: Make sure that the mylar [H] is in the correct position when reinstalling the
cutter unit. There are 6 of these mylars across the length of the cutter unit.
(Refer to 6.7.10 Master Feed Mylar Positioning.)
[I]
I: Platen release motor
J: Platen release sensor
NOTE: Make sure that the gear is positioned correctly. Install it in accordance with
6.7.9 Platen Release Cam Adjustment section.
MASTER FEED SECTION
[G]
[H]
[F]
C229R065.WMF
C229R042.WMF
6-31
[J]
[F]