Mount The Intake Grille; Connect 2 Wires Of Decorative Panel To Main Board Of The Unit; Fasten The Control Box Lid With 2 Screws; Close The Intake Grille And Close The 2 Grille Hooks - Bosch Climate 5000 Series Installation Manual

Hide thumbs Also See for Climate 5000 Series:
Table of Contents

Advertisement

2 8 | Bosch Climate 5000 Series Four Way Cassette Ductless Single Split Air Conditioner / Heat Pump
After installing the decorative panel, ensure that there is no space
between the unit body and decorative panel. Otherwise air may leak
through the gap and cause dewdrop. (See figure 51 below)
Figure 51

11.4 Mount the Intake Grille

 Ensure that the buckles at the back of the grille be properly seated in
the groove of the panel.
Figure 52

11.5 Connect 2 wires of decorative panel to main board of the unit

Diagram shown for 9k ~ 24k models
5-core wire
Figure 53
Data subject to change
Diagram shown for 36k & 48k models
Figure 54

11.6 Fasten the Control Box Lid with 2 Screws

Figure 55

11.7 Close the Intake Grille and Close the 2 Grille Hooks

10-core wire
Figure 56
Control box
04.2019 | Bosch Thermotechnology Corp.
Installation Manual

Advertisement

Table of Contents
loading

Table of Contents