Outdoor Unit Installation; Select Installation Location - Bosch Climate 5000 Series Installation Manual

Installation Manual

7 Outdoor Unit Installation

7.1 Select Installation Location

Before installing the outdoor unit, you must choose an appropriate location. The
following are standards that will help you choose an appropriate location for the
unit.
 Proper installation locations meet the following standards:
—
Meets all spatial minimum requirements shown in Installation Space
Requirements (Figure 18)
Figure 18
—
Good air circulation and ventilation
—
Firm and solid—the location can support the unit and will not vibrate
—
Noise from the unit will not disturb others
—
Protected from prolonged periods of direct sunlight or rain
 DO NOT install unit in the following locations:
—
Near an obstacle that will block air inlets and outlets
—
Near a public street, crowded areas, or where noise from the unit
will disturb others
—
Near animals or plants that will be harmed by hot air discharge
—
Near any source of combustible gas
—
In a location that is exposed to large amounts of dust
—
In a location exposed to excessive amounts of salty air
Bosch Thermotechnology Corp. | 04.2019
Bosch Climate 5000 Series Four Way Cassette Ductless Single Split Air Conditioner / Heat Pump | 15
Figure 19
Figure 20
NOTICE
 If the unit is exposed to heavy wind: Install unit so that air
outlet fan is at a 90° angle to the direction of the wind. If
needed, build a barrier in front of the unit to protect it from
extremely heavy winds. See Figures 19 and 20.
Strong wind
NOTICE
 This unit is not designed for application in areas frequently
exposed to salty air (seaside) conditions..
Strong wind
Wind Baffle
Strong
wind
Data subject to change