Table of Contents
Advertisement
EcoVision II Plus Door Upgrade Installation Manual
SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during unload-
ing.
This equipment has been carefully inspected at
our factory. Any claim for loss or damage must
be made to the carrier. The carrier will provide
any necessary inspection reports and/or claim
forms.
GENERAL
Verify the merchandiser model(s) to be outfitted
with the EcoVision II Plus door kit(s) by locat-
ing the merchandiser's serial plate.
This instruction details the installation of
EcoVision II Plus doors N6D Tyler Multi-deck
Merchandisers.
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.
Do NOT lean glass doors against the
merchandiser lineup. Leave them packed in
their protective packaging until they are
ready to be directly installed in the lineup.
Accidental glass breakage can be dangerous.
Always wear protective glasses and gloves
when handling glass.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
EcoVision II Plus doors may be installed
without the need to remove product from the
merchandisers. Check with the store manager,
and let them know how long a door lineup will
take to complete. The average time to install
each door is about 20 minutes.
W
M
L
ater
isters and
ight
glass doors. Remove any mist equipment from case
before installing doors.
N
Read these instructions carefully
and completely before attempting
to install EcoVision II Plus doors.
Use caution handling glass parts. Always
wear safety glasses, long pants, gloves and
arm guards when handling glass doors.
Do not lean doors against case.
Doors should remain in packing crate
until it is time to install on to case.
Installing EcoVision II Plus Doors
1
requires at least two installers!
A. Carefully unpack EcoVision II Plus Door
upgrade kit(s), and examine parts. Do not
carry doors by the handle.
P/N 0530690_B
r
may not be used with
aiLs
ote
1
Advertisement
Table of Contents
