Table of Contents
Advertisement
P/N 0530690_B
Installing Split Rail Hinge Plate
12
Assembly (4ft) for stair stepping the
doors
A. Look for "L" and "R" on hinge plate. "L"
is for left side of case. "R" is for right side of
case.
B. Fasten center screw only.
D
o not carry Doors by hanDle
P
ersonal injury anD Damage
to the Doors may result
13
Installing Doors
A. Install left-sided door first at left side of
case. Use a putty knife to push down top door
pin to help slip top pin into door casting. Then
set bottom of door torsion rod into hinge plate
hole.
B. Install the right door in the same manner.
C. If doors to not lineup correctly, the doors
can be raised or lowered by sliding the hinge
plate left or right. Slide hinge plate assembly
left, and the right door will raise, left door goes
down. Slide hinge plate assembly right, and
the left door will raise, right door goes down.
Once level screw down (5 places) on hinge plate
assembly.
10
.
.
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
Advertisement
Table of Contents
