Advertisement
Table 4. Events for the Enclosure component (continued)
Event
enclosure_firmware_wrong
enclosure_found
enclosure_needsservice
enclosure_ok
enclosure_unknown
enclosure_vanished
esm_absent
esm_failed
esm_ok
expander_absent
expander_failed
expander_ok
fan_failed
fan_ok
fan_speed_high
fan_speed_low
no_enclosure_data
power_high_current
power_high_voltage
6 IBM Elastic Storage System 3000: Service Guide
Event Type
Severity
STATE_CHANGE
WARNIN
G
INFO_ADD_ENTITY
INFO
STATE_CHANGE
WARNIN
G
STATE_CHANGE
INFO
STATE_CHANGE
WARNIN
G
INFO_DELETE_ENTIT
INFO
Y
STATE_CHANGE
WARNIN
G
STATE_CHANGE
WARNIN
G
STATE_CHANGE
INFO
STATE_CHANGE
WARNIN
G
STATE_CHANGE
ERROR
STATE_CHANGE
INFO
STATE_CHANGE
WARNIN
G
STATE_CHANGE
INFO
STATE_CHANGE
WARNIN
G
STATE_CHANGE
WARNIN
G
STATE_CHANGE
WARNIN
G
STATE_CHANGE
WARNIN
G
STATE_CHANGE
WARNIN
G
Message
Description
The firmware level
The firmware level
of enclosure {0} is
of the enclosure is
wrong.
wrong.
Enclosure {0} was
A GNR enclosure
found.
listed in the IBM
Spectrum Scale
configuration was
detected.
Enclosure {0}
The enclosure
needs service.
needs service.
Enclosure {0} is ok.
The enclosure
state is ok.
Enclosure state {0}
The enclosure
is unknown.
state is unknown.
Enclosure {0} has
A GNR enclosure
vanished.
listed in the IBM
Spectrum Scale
configuration was
not detected.
ESM {0} is absent.
The ESM state is
not installed .
ESM {0} is failed.
The ESM state is
failed.
ESM {0} is ok.
The ESM state is
ok.
expander {0} is
The expander is
absent.
absent.
expander {0} is
The expander state
failed.
is failed.
expander {0} is ok.
The expander state
is ok.
Fan {0} is failed.
The fan state is
failed.
Fan {0} is ok.
The fan state is ok.
Fan {0} speed is
The fan speed is
too high
out of the tolerance
range
Fan {0} speed is
The fan speed is
too low
out of the tolerance
range
Enclosure data and
Cannot query the
state information
enclosure details.
cannot be queried.
State reporting for
all enclosures and
canisters will be
incorrect.
Power supply {0}
The DC power
reports high
supply current is
current.
greater than the
threshold.
Power supply {0}
The DC power
reports high
supply voltage is
voltage.
greater than the
threshold.
Cause
User Action
N/A
Check the installed
firmware level using
mmlsfirmware
command.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
A GNR enclosure,
Run the
listed in the IBM
mmlsenclosure
Spectrum Scale
command to verify
configuration as
that all expected
mounted before, is
enclosures exist.
not found. This
could be a valid
situation.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Check the enclosure
cooling module LEDs
for fan faults.
N/A
Check the enclosure
cooling module LEDs
for fan faults.
The
Run the
mmlsenclosure
mmlsenclosure
all -L -Y
command to check
command fails to
for errors. Use the
report any
lsmod command to
enclosure data.
verify that the
pemsmod is loaded.
N/A
N/A
N/A
N/A
Advertisement
