Advertisement
Table 3. Events for the Canister component (continued)
Event
Event Type
dimm_size_wrong
STATE_CHANG
E
dimm_speed_ok
STATE_CHANG
E
dimm_speed_wrong
STATE_CHANG
E
pair_canister_missing
STATE_CHANG
E
pair_canister_visible
STATE_CHANG
E
Enclosure events
The following table lists the events that are created for the Enclosure component.
Table 4. Events for the Enclosure component
Event
adapter_bios_notavail
adapter_bios_ok
adapter_bios_wrong
adapter_firmware_notavail
adapter_firmware_ok
adapter_firmware_wrong
current_failed
4 IBM Elastic Storage System 3000: Service Guide
Severity
Message
ERROR
One or more
memory dimm
modules have an
unsupported
capacity.
INFO
All installed memory
dimms have the
expected speed.
ERROR
One or more
memory dimm
modules have an
unsupported speed.
WARNING
Pair canister {0} is
missing or dead.
INFO
Pair canister {0} is
visible.
Event Type
Severity
STATE_CHANGE
WARNIN
G
STATE_CHANGE
INFO
STATE_CHANGE
WARNIN
G
STATE_CHANGE
WARNIN
G
STATE_CHANGE
INFO
STATE_CHANGE
WARNIN
G
STATE_CHANGE
ERROR
Description
The capacity of one
or more memory
dimm slots is not as
expected. This
configuration is not
supported.
The speed of all
populated memory
dimm slots is as
expected.
The speed of one or
more memory dimm
slots is not as
expected. This
configuration is not
supported.
Could not get the
state of the pair
canister. It might be
missing or dead.
Successfully get the
state of the pair
canister.
Message
Description
The bios level of
The bios level of
adapter {0} is not
the adapter is not
available.
available.
The BIOS level of
The BIOS level of
adapter {0} is
the adapter is
correct.
correct.
The bios level of
The bios level of
adapter {0} is
the adapter is
wrong.
wrong.
The firmware level
The firmware level
of adapter {0} is
of the adapter is
not available.
not available.
The firmware level
The firmware level
of adapter {0} is
of the adapter is
correct.
correct.
The firmware level
The firmware level
of adapter {0} is
of the adapter is
wrong.
wrong.
currentSensor {0}
The currentSensor
failed.
state is failed.
Cause
User Action
The /opt/ibm/gss
Inspect the output of the
/tools/bin/
ess3kplt command to
ess3kplt command
see which memory dimm
returned some
slots have an
capacity errors.
unsupported capacity and
replace those dimm
modules.
The /opt/ibm/gss
N/A
/tools/bin/
ess3kplt command
returned no speed
errors.
The /opt/ibm/gss
Inspect the output of the
/tools/bin/
ess3kplt command to
ess3kplt command
see which memory dimm
returned some speed
slots have an
errors.
unsupported speed and
replace those dimm
modules.
The
Check for detailed error
mmlsenclosure
events of the referenced
command reports
canister node by using the
only one canister
mmhealth command.
instead of two.
Inspect the output of the
mmlsenclosure all -
L command for the
referenced canister.
The
N/A
mmlsenclosure
command reports
both canisters.
Cause
User Action
N/A
Check the installed
BIOS level using the
mmlsfirmware
command.
N/A
N/A
N/A
Check the installed
BIOS level using the
mmlsfirmware
command.
N/A
Check the installed
BIOS level using the
mmlsfirmware
command.
N/A
N/A
N/A
Check the installed
BIOS level using the
mmlsfirmware
command.
N/A
N/A
Advertisement
