Sony DVP-NS300 Operating Instructions Manual page 61

Troubleshooting
If you experience any of the following
difficulties while using the
CD/DVD
player,
use this troubleshooting guide to help remedy
the problem before requesting repairs
Should any problem persist, consult your
nearest Sony dealer
The power is not turned on.
+ Check that the AC power cord is connected
securely
There is no picture
+ The connecting cords are not connected
securely
I) The connecting cords are damaged
+ The CDlDVD player is not connected to the
correct TV input jack (page 17)
I) The video input on the TV is not set so that you
can view pictures from the CD/DVD player
Picture noise appears
+ The disc is dirty or flawed
+ If the picture output from your CD/DVD
player goes through your VCR to get to your
TV, the copy-protection signal applied to
some DVD programs could affect picture
quality If you still experience problems even
when you connect your CD/DVD player
directly to your TV, please try connecting your
CD/DVD player to your TV's S video input
kmge 17)
Even though you set the aspect ratio
in "TV TYPE" of "SCREEN SETUP,"
the picture does not fill the screen
I, The aspect ratio of the disc is fixed on your
DVD
I '> ~
There is no sound.
The connecting cord is not connected securely
The connecting cord is damaged
The CD/DVD player is connected to the
wrong input connector on the amplifier
(receiver) (page 21,22,23)
The amplifier (receiver) input was not
changed so that you can listen to the CD/DVD
player
The CDlDVD player is in pause mode or in
Slow-motion Play mode
The CD/DVD player is in fast forward or fast
reverse mode
If the audio signal does not come through the
DIGITAL OUT (OPTICAL and COAXIAL)
jacks, check the audio settings (page 58)
Sound is noisy.
I, The disc is dirty or flawed
I) When playing a CD with DTS sound tracks,
noise will come from the LINE OUT L/R
(AUDIO) l/2 jacks (page 29)
Sound distortion occurs
* Set "AUDIO ATT" in "AUDIO SETUP" to
"ON" (page 58)
The remote does not function.
+ There are obstacles between the remote and
the CD/DVD player
I, The distance between the remote and the CD/
DVD player is too far
+ The remote is not pointed at the remote sensor
on the CDiDVD player
+ The batteries in the remote are weak
continued-
61