Sony DVP-NS300 Operating Instructions Manual page 22

This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver) If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 23
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural))
The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used
If your amplifier (receiver) has R and L audio input jacks only, use B
If your amplifier
(receiver) has a digital input jack, use a
WRecommended surround sound effects using this connection with your amplifier (receiver)
*Dolby Surround (Pro Logic) (page 64)
'e For correct speaker setting location, please refer to the operating instructions of the amplifier (receive])
CD/DVD player
Stereo audio cord
coaxial digital cord (not wwli$)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(red)
to coaxial or optical digital input
to audio input
[Speakers]
:~-~---"'~*~"-""'----
~_"______
,--
: I-
Dolby Surround amplifier (receiver)
::
: :
::
; LI"* ___-_ __"___,
A: Signal flow
22
*When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer