Sony DVP-NS300 Operating Instructions Manual page 29

Notes on playing DTS sound tracks on
aCD
l
When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks To avoid possible
damage to the audio system, the consumer
should take propel precautions when the
analog stereo jacks of the player are
connected to an amplification system To
enjoy DTS Digital SurroundTM playback, an
external 5 l-channel decoder system must
be connected to the digital jacks of the
player
l
Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 42)
l
Do not play DTS sound hacks without first
connecting the player to an audio
component having a built-in DTS decoder
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL and
COAXIAL) jacks even if "DTS" in
"AUDIO SETUP" is set to "OFF" in the
Setup Display (page 60), and may affect
yam ears or cause yom speakers to be
damaged
Notes on playing DVDs with a DTS
sound track
l
DTS audio signals are output only through
the DIGITAL OUT (OPTICAL and
COAXIAL) jacks
l
If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 59) A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged
l
When you play a DVD with DTS sound
tracks, set "DTS" to "ON" in "AUDIO
SETUP" (page 59)
- INSTANT
REPLAY
-W
To
Operation
stop
Pless n
Pause
Resume play after
pause
Press II
Press II or
D
Go to the next chapter, Press w
track or scene in
continuous play mode
Go back to the Press H
preceding chapter,
tlack or scene in
continuous nlav mode
Stop play and remove Press &
the disc
Replay a previous
scene (DVD only)
Press INSTANT
REPLAY
L".
c The Instant Replay function is useful when you
want to review a scene or dialog that you missed
You may not be able to use the Instant Replay function
with some scenes
29