Sony DVP-NS300 Operating Instructions Manual page 60

3PCM
IOLBY
IIGITAL
Select this when the player is
connected to an audio
component lacking a built-in
Dolby Digital decoder You can
select whether the signals
conform to Dolby Surround (Pro
Logic) or not by making
adjustments to the
"DOWNMIX" item in "AUDIO
SETUP" (page 58)
Select this when the player is
connected to an audio
component with a built-in Dolby
Digital decoder
If the player is connected to an
audio component lacking a built-
in Dolby Digital decoder, do not
set this Otherwise, when you
play the Dolby Digital sound
track, a loud noise (or no sound)
will come out from the speakers,
affecting yourears or causing the
speakers to be damaged
WDTS
Selects if DTS signals are output via the
DIGITAL OUT (OPTICAL and COAXIAL)
jacks
OFF Select this when the player is
connected to an audio component
lacking a built-in DTS decoder
Note,
however, that the DTS signals
contained in a CD are output even if
"OFF" is selected
ON
Select this when the player is
connected to an audio component
having a built-in DTS decoder
If the player is connected to an audio
component lacking a built-in DTS
decoder, do not set this Otherwise,
when you play the DTS sound track, a
loud noise (or no sound) will come out
from the speakers, affecting your ears
or causing the speakers to be damaged
nm
If you select one of the TVS settings while playing a
DVD, the player does not output Dolby Digital signals
from the DIGITAL OUT (COAXIAL and OPTICAL)
jacks (when you set "DOLBY DIGITAL" in "AUDIO
SETUP" to "D-PCM")
60