Detroit Diesel MBE 4000 DDEC VI Troubleshooting Manual page 207

17.7.1 Factory-installed Sensors
The sensors integrated into the factory-installed Engine Harness are listed in Table 17-23.
Sensor
Camshaft Position Sensor (CMP Sensor)
Crankshaft Position Sensor
(CKP Sensor)
DPF Inlet Pressure Sensor
DPF Outlet Pressure Sensor
DPF Outlet Temperature Sensor
DOC Inlet Temperature
DOC Outlet Temperature
Engine Coolant Temperature Sensor
(ECT Sensor)
EGR Delta Pressure Sensor
EGR Delta P Sensor
EGR Temperature Sensor
Engine Coolant Temperature Sensor
(ECT Sensor)
Engine Oil Pressure Sensor
(EOP Sensor)
Engine Oil Pressure Sensor
(EOP Sensor)
Engine Oil Temperature Sensor
(EOT Sensor)
Fuel Line Pressure Sensor
Fuel Compensation Pressure Sensor
Intake Manifold Temperature Sensor
(IMT Sensor)
Supply Fuel Temperature Sensor
(SFT Sensor)
Turbo Compressor Temperature
Out Sensor
Turbo Speed Sensor
Water-in-Fuel Sensor
(MBE 900 only)
Table 17-23 Function of Factory-installed Sensors
All information subject to change without notice.
6SE568 Copyright © PRELIMINARY 2007 DETROIT DIESEL CORPORATION
Indicates a specific cylinder in the firing order.
Senses crankshaft position and engine speed for functions such
as fuel control strategy.
Sensor measures pressure between the Diesel Oxidation Catalyst
(DOC) and the Diesel Particulate Filter (DPF) in the aftertreatment
assembly located in the exhaust system of the vehicle.
Sensor measures pressure on the outlet of the after-treatment
device in the exhaust system of the vehicle. Located after the DPF
that is within the aftertreatment device.
Temperature measured at the outlet of the after-treatment system
that is installed within the exhaust system of the vehicle. It's
located after the DPF that is within the aftertreatment unit.
DOC Temperature In - Temperature measured at the inlet of
the after-treatment device in the exhaust system of the vehicle.
Located before the DOC that is within the after-treatment device.
Temperature measured between the DOC and the DPF in the
aftertreatment assembly located in the exhaust system of the
vehicle.
Senses coolant temperature for functions such as engine
protection, fan control and engine fueling.
Senses EGR pressure for EGR control.
Senses EGR exhaust temperature after EGR cooler. Used for
EGR system diagnosis.
Senses coolant temperature for functions such as engine
protection, fan control and engine fueling.
Senses gallery oil pressure for functions such as engine protection.
Senses gallery oil pressure for functions such as engine protection.
Senses oil temperature for functions such as reducing variation
in fuel injection and fan control.
Compensates fuel line pressure
Senses turbo boost for functions such as smoke control and engine
protection.
Senses boost temperature
Senses fuel temperature for functions such as engine fueling.
Senses turbo out air temperature.
Monitors turbo speed.
Detects water in the fuel filter that alerts the owner/driver that the
fuel filter needs to be dried out.
(Rev. )
MBE 4000 DDEC VI TROUBLESHOOTING GUIDE
Function
17-45