TRENDnet TV-IP323PI User Manual page 37

TRENDnet User's Guide
Light sensitivities
Smart IR: Smart IR can adjust the strength of infrared lights at
night depending on the distance of an object to
maintain the maximum IR light distance and while
maintaining a clear picture when object is close by.
Default: On.
Max. Exposure
Time:
Video Standard: This is the base frequency for the video refresh rate. It
is recommended to set to the same frequency of your
local video standard (NTSC: 60, PAL: 50). Default:
60Hz.
Day/Night
Switch:
Auto:
Sensitivity: The light sensor sensitivity.
Switch Time: The time delayed to switch between
modes. Longer switch time can prevent unnecessary
mode flipping if an object is blocking the light source
temporarily. Range: 5‐120 seconds, default: 5
seconds.
© Copyright 2018 TRENDnet. All Rights Reserved.
Adjust this value for exposure time for
each picture. You can choose a value
between 1/3 second to 1/100,000
second. The default value is 1/30 second
exposure time for each picture.
Choose whether you want the
camera to be set to the day mode
(color video) or night mode (IR
enhanced black/white video). You
can manually set it to day mode or
night mode, adjust by lighting
(Auto), or pre‐define schedule.
Schedule:
Use quick selection or enter the time down below.
Click OK to confirm the time you want to set.
Start Time: The start time for day mode.
Stop Time: The start time for day mode.
Position adjustments
Mirror:
Choose horizontal, vertical or both to adapt to the
physical position of installation.
TV‐IP323PI
34