Advertisement
Produktinformation FMC−120−DKM / EST GLT
5. Device structure
The non−automatic fire detector is available in several variants and essentially consists of the
following elements.
9
8
7
6
Pos. Designation
1
Plastic housing
2
Cable ducts (interchangeable), for cable inlet and outlet. The cable
can also be ducted through openings in the rear wall of the housing.
3
Connection terminal strip
4
Detector door with replaceable glass pane, hidden lock
(and seal, for Form H)
5
Glass pane
6
Display (LED)
7
PC board (with protective coating for Form H) The PC board is
clipped onto the floor of the housing.
8
Trigger mechanism (clipped onto the PC board), consisting of plastic
frame and push button with spring.
9
Reset lever (locking mechanism only for manual call points)
2
1
2
3
5
Page 8 of 18
PI − 34.51 en
4
BDL−F.01U.066.178
A2.en/ 11.04.2007
ST−FIR/ PRM1 / sib
Advertisement
