Chapter 4. Illustrated Parts List - Hobart POWER MASTER Operation And Maintenance Manual With Illustrated Parts List

Solid state frequency converter
Table of Contents

Advertisement

OM-2065 / Operation and Maintenance Manual
90SB51 / Spec. 7015-3 / Frequency Converter
Section 1. Introduction
1. General
The Illustrated Parts List identifies, describes, and illustrates main assemblies, subassemblies, and
detail parts of a Solid State AC/AC Converter Unit manufactured by Hobart Brothers Company,
Ground Power Division, Power Systems Group, Troy, Ohio 45373, and identified by Specification
Number 7015-3.
2. Purpose
The purpose of this list is to provide parts identification and descriptive information to maintenance and
provisioning personnel for use in provisioning, requisitioning, purchasing, storing, and issuing of spare
parts.
3. Explanation of Parts List
a. Contents
The parts list contains a breakdown of the equipment into assemblies, subassemblies, and detail
parts. All parts of the equipment are listed except:
(1) Standard hardware items (attaching parts) such as nuts, screws, washers, etc., which are
available commercially.
(2) Bulk items such as wire, cable, sleeving, tubing, etc., which are also commercially available.
(3) Permanently attached parts which lose their identity by being welded, soldered, riveted, etc., to
other parts, weldments, or assemblies.
b. Parts List Form
This form is divided into five columns. Beginning at the left side of the form and proceeding to the
right, columns are identified as follows:
(1) "FIGURE-ITEM NO." Column
This column lists the figure number of the illustration applicable to a particular parts list and also
identifies each part in the list by an item number. These item numbers also appear on the
illustration. Each item number on an illustration is connected to the part to which it pertains by a
leader line. Thus the figure and item numbering system ties the parts lists to the illustrations and
vice versa.
(2) "HOBART PART NUMBER" Column
Part numbers appearing in this column are Hobart numbers. These are the numbers to which a
customer should refer when purchasing replacement parts, or identifying a part for servicing or
replacement.
Nov 01/90

Chapter 4. Illustrated Parts List

Chapter 4-1
Page 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7015-3

Table of Contents