Remember To Check - Roberts Gorden CoRayVac B-2 Instructions Manual

Operation and Maintenance

REMEMBER TO CHECK:

The Vicinity of the Heater
Vehicles and Other Objects
Reflector
Vent Pipe
Outside Air Inlet
18
Do not store or use flammable objects, liquids or vapors near
the heater.
Immediately remove these items if they are present.
Maintain the clearances to combustibles.
Do not hang anything from, or place anything on, the heater.
Make sure nothing is lodged underneath the reflector, in
between the heat exchanger tubes or in the decorative or pro-
tective grilles (included with select models).
Immediately remove objects in violation of the clearances to
combustibles.
Make sure there is no dirt, sagging, cracking or distortion.
Do not operate if there is sagging, cracking or distortion.
Make sure reflectors are correctly overlapped.
Clean outside surface with a damp cloth.
Venting must be intact. Using a flashlight, look for obstructions,
cracks on the pipe, gaps in the sealed areas or corrosion.
Do not operate if there are obstructions, cracks, gaps or corrosion.
The area must be free of dirt and dust.
Remove any carbon deposits or scale using a wire brush.
Inlet must be intact. Look for obstructions, cracks on the pipe,
gaps in the sealed areas or corrosion.
Do not operate if there are obstructions, cracks, gaps or corro-
sion.
The area must be free of dirt and dust.
Clean and reinstall as required.
®
CORAYVAC HEATING SYSTEMS