Main Picture Mode; Pip Mode; Picture-In-Picture Description - Westinghouse LCD-TV User Manual

27" Wide-Format LCD-TV User Manual

Picture-in-Picture Description

Main picture mode

1.You can change the signal source of the main picture through the MAIN MODE of your remote control.
The signal source you choose appears on the upper left corner of the screen (diagram 1).
2.The main picture will be changed in the sequence as follows: TV/CVBS(AV)/S-VIDEO/SCART
(for Europe only)/YPbPr1/YPbPr2 or D4 (for Japan only)/VGA.
3.Users are allowed to set the options specifically designed for a certain mode under the OSD MENU.

PIP mode

1.LCD display can display the main signal and auxiliary visual input signals simultaneously.
The auxiliary signal (or input source) appears in a frame on the main picture. This is known as PIP
picture (diagram 1). To activate PIP mode from the PIP button on the remote controller.
2.Please select the PIP input source from the SOURCE button on the remote controller. There is no PIP
button on the LCD display control panel.
3.The sub-signal options change as the main signal source changes. (Diagram 2)
The signal source
Main signal
Channel & Audio mode
Sub signal
Main signal
TV
CVBS(AV
S-VIDEO
SCART
(For Europe only)
YPbPr1
YPbPr2
D4 (For Japan only)
VGA (PC)
1. TV
Sub signal
2. OFF VGA YPbPr1 YPbPr2
CHANNEL NO. : 25 SAP
TV
OFF
(PIP)
(Diagram 1)
AV SV SCART YPbPr1 YPbPr2
(For Europe
CVBS
(S-VIDEO)
only)
YPbPr2
D4
(Diagram 2)
20
Sub signal
Main signal
VGA
D4
(For Japan
( PC )
only)
YPbPr2
D4