Antenna Connection; Video Connections - Westinghouse LCD-TV User Manual

27" Wide-Format LCD-TV User Manual
To share an input or reduce the number of wires to the display, use a VCR or A V Receiver to
consolidate connections. It is common to route the output of your camcorder, cable box (STB),
satellite receiver (IRD) and personal video recorder (PVR) through your VCR for recording, editing
and time shifting.
Not all devices are the same and many may need additional cables, adapters and setup. In particular,
computers, game consoles, high-definition receivers and progressive DVD players must be set to 16:9
output accordingly.

Antenna Connection

This LCD-TV has a built-in cable-ready NTSC tuner for analog cable and NTSC broadcast signals.
You may choose to connect the analog cable or TV antenna wire (not included) directly to this
LCD-TV antenna input.
Tuner

Video Connections

There are four types of video inputs: YPbPr1, YPbPr2, S-Video and Video. Each of these video inputs
has a corresponding set of stereo left and right audio inputs.
These connectors are color-coded to match the colors of the corresponding connectors on other devices
and cables.
The YPbPr1 and YPbPr2 inputs will only accept 480i, 480p, 1080i and 720p signals. Use this to
connect high definition devices such as a terrestrial HDTV receiver, HD satellite box, HD cable box
or progressive scan DVD player.
Use this to obtain better color performance from devices such as a DVD player. The built-in
progressive scan logic will automatically convert interlaced DVD to non-interlaced.
The S-Video and Video inputs are provided for use with devices such as a VCR, satellite receiver,
digital cable box, or game console. The built-in progressive scan logic will also automatically convert
these interlaced NTSC signals to non-interlaced.
7