Wall Mounting - Westinghouse LCD-TV User Manual

27" Wide-Format LCD-TV User Manual

Wall Mounting

Use a qualified and insured professional installation service to mount your LCD-TV on a wall.
Improper mounting can cause this LCD-TV to fall and both be damaged and cause severe damage.
The wall mounting bracket and screws are sold separately and not included with this product. This
product conforms to VESA flat panel display mounting interface specification. Be sure the mounting
solution can support more than the weight of the 27" LCD-TV, 18kg (40lb).
Please provide the mounting kit and these instructions to the installation professional:
A. Turn off and unplug the LCD-TV . Place your LCD display face down on a soft clean
surface paying particular attention not to scratch the LCD surface, speakers or enclosure.
B. Remove the TV stand by unscrewing the 6 screws attaching the base from the LCD-TV
as shown in figure B. Save the 6 screws and stand in a safe place.
C. Screw and securely tighten the 4 wall hanging screws into the rear of the LCD-TV as
shown in figure C.
D. Locate several studs in the wall. Attach the mounting bracket securely to multiple studs in
the wall. Often one or more wood cleats are required to allow the mounting bracket to be
located between studs. Double-check for strength to support more than the weight of the
27" LCD-TV, 18kg (40lb). See figure D.
E. Attach any cables to your LCD-TV at this time.
F. Carefully place the LCD-TV on the wall-mounting bracket by matching up the 4 wall
hanging screw heads to the corresponding holes in the mounting bracket.
G. Carefully test for strength before releasing the LCD-TV.
A
C
10cm
B
D
32