IMPORTANT PRODUCT SAFETY INSTRUCTIONS ...2 Antenna Installation Safety ...4 Cleaning the LCD TV ...4 Safety Guidelines ...5 FCC Compliance Statement...5 INSTALLATION ...6 Insert Remote Control Batteries ...6 Attach Base Stand to LCD TV ...7 Connect Antenna, Cable, Video, S-Video, YPbPr, DVI, and/or VGA Cables...8 Connect Power Cable...10 Turn Power On...10 Programming TV Channels...11...
IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your television. Failure to follow warnings can result in personal injury or damage to product. Keep this User’s Manual in a convenient location for future reference.
Page 4
LCD TV contains high-voltage parts. You may be seriously injured if you touch them. Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by anyone not authorized by Westinghouse Digital. Refer all servicing and repairs to qualified service personnel.
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD display case. Westinghouse Digital will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a BNC cable is going to be used, use only a shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital will void the user's authority to operate this device.
Installation Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb WSXGA+ computer monitor —making it a practical solution for tight spaces in the office, bedroom, or kitchen.
2. Attach Base Stand to LCD TV Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap the base stand into place. Detachable Base Stand To detach the base stand, just press on the locking tabs on the bottom of the base stand and remove the base stand from the stand neck.
Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV. Video Inputs S- Video Audio-R Audio-L Video YPbPr Antenna Audio-In Audio-Out Video Inputs PC Inputs PC Inputs D-Sub (VGA)
Page 10
Note: The Audio-L and Audio-R (Audio L/R) inputs are shared between YPbPr, S-Video, and Video source input connectors. Connecting a computer to the LCD TV: IMPORTANT: Before you begin, make sure the computer and TV are turned off. Connect a D-Sub (VGA) or DVI cable and an audio cable to the back of the LCD TV. D-Sub CONNECTION: Connect an analog D-Sub (VGA) cable from your computer VGA port to the D-Sub input connection.
Connect Power Cable Connect the power cord to the back of the LCD TV and then into a properly grounded AC outlet. Turn Power On Press the power button on the right side of the LCD TV or on the remote control to turn on the Power Button Remote Power Button...
Programming TV Channels 1. Select TV as the source input using the Source button on the remote control. 2. Press the Menu button to display the OSD Display Menu. 3. Use the CH▲/▼arrow keys to highlight the TV Menu. 4. Using the Vol ► arrow keys select the TV sub-menu. Use the ▼ to highlight the CH Auto Scan function.
Controls & Connections This section describes the keypad panel controls, and remote control in more detail. Front View of the Product Use the buttons on the right side keypad control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the next page and are defined in the “OSD Functions”...
Page 14
Side Keypad Controls Button Mode TV Source Channel up Channel down Volume down Vol- Vol+ Volume up Press and hold for 2 seconds to Menu/Source access the OSD menu. Press and release to change source. Power TV ON or OFF OSD Menu Navigate up Navigate down...
Remote Control 1. Mute Turn audio on and off. 2. MTS (Multi-channel TV Sound) Stereo, Mono and SAP sound selection 3. Power Switch the power on and off. 4. Sleep Automatically turn off the TV after a set time. 5. Display Display the channel information.
OSD Functions This section describes each on-screen display (OSD) command. There are different OSD menus depending on whether you are in TV, Video (Video/S-Video/YPbPr) or PC (D-Sub/DVI) mode. All the function settings for your LCD TV are controlled either via the remote control or using the control keys located on the right side of the LCD TV.
Audio Menu In the Audio Menu use the Vol► button to select the Audio sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Volume Volume adjustment...
TV Menu In the TV Menu, use the Vol► button to select the TV sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Tuner System Select between STD, HRC, IRC, Air (Depending on your local area)
Function Name Language English, Chinese, French, Spanish OSD Transparency Set OSD transparency level OSD Time-out Set the time to turn off the OSD automatically OSD Position OSD horizontal/vertical position adjustment Reset Restore factory default settings Sleep Set the Sleep timer for 30, 45, 60, 90, or 120 minutes Aspect Ratio Set the display to Full, Normal, or Zoom (Can only change with an active signal) V-Chip and Parental Control Menu...
Rating Menus Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the PIN code. Use the ▼ button to highlight the Movie (MPAA) or TV (TVPG) menu. Use the ► button to select the sub-menu. Use the ▲/▼ buttons to highlight the Movie/TV Rating to be blocked or un-blocked.
PC OSD Menu Image Menu In the Image Menu use the Vol► button to select image sub-menu. Use the CH▲/▼ buttons to highlight function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Brightness Contrast...
Audio Menu In the Audio Menu use the Vol► button to select the Audio sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Volume Volume adjustment...
Miscellaneous Menu In the Miscellaneous Menu, use the Vol► button to select the “Misc” sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Language English, Chinese, French, Spanish...
PIP Function Menu Picture In Picture (PIP) is available in D-Sub, DVI, modes only. Use the Vol► button to select the PIP Function sub-menu. Use either the ▲/▼ arrow keys to navigate within the menu. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. The Exit button on the remote control will allow you to back out of the OSD menu.
Input Source not found or Out of Range If there is no source connected to the Input selected (TV, Video, S-Video, YPbPr, DVI, or D-Sub), the following will be displayed: If the signal source is DVI or D-Sub mode and the Display settings are not compatible with, or are out of range of the LCD TV, the following will be displayed:...
Appendix Specifications Panel Size/Type Native/Optimum Resolution Aspect Ratio Viewing Angle Display Colors Active Display Area PC Compatibility Video Compatibility (Video, S-Video, YPbPr) Tuner Compatibility Video Features Audio Features Other Features Input Connectors Output Connectors Remote Control Unit Accessory/Cables Dimensions (w x h x d) inches Weight AC Power Input Range Regulatory Approvals...