27" Wide-Format LCD-TV User Manual Preface This manual is designed to assist you in setting up and using your LCD-TV. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright.
27" Wide-Format LCD-TV User Manual Table of Contents Introduction Features Installation Guide Unpacking Connections Planning Your Connections Antenna Connection Video Connections PC & Audio Output Connections Power Connection Using The Remote Programming TV Channels Enjoying Wide-Format Movies Reference Guide Connector Descriptions...
This user guide is divided into two parts: an Installation Guide and a Reference Guide. The first time you setup and use this LCD-TV, please follow the instructions in the Installation Guide. To fully explore the abilities and individual features of this LCD-TV, a Reference Guide follows this Installation Guide.
Installation Guide You will soon be enjoying your LCD-TV. The following are instructions on what parts to expect to find within the box, how to connect your LCD-TV and how to use your remote to setup and configure basic options.
Connections There are 4 separate locations for connectors on the rear of the LCD-TV: Antenna, Video, PC and Power. PC RGB(Analog) PC Audio Input Audio Output(L/R) Subwoofer Output PC Connectors Dust Cover Antenna 27" Wide-Format LCD-TV User Manual Menu Function...
27" Wide-Format LCD-TV User Manual There are two user accessible covers that can be removed (without tools) by gently squeezing the plastic clip. Carefully remove both covers to expose the PC and AV connections. Replace these covers as desired. Planning Your Connections Below is a table of some common configurations that may help you to determine how best to connect your particular devices.
DVD players must be set to 16:9 output accordingly. Antenna Connection This LCD-TV has a built-in cable-ready NTSC tuner for analog cable and NTSC broadcast signals. You may choose to connect the analog cable or TV antenna wire (not included) directly to this LCD-TV antenna input.
The VGA input is an analog RGB interface with separate H & V sync signals. VGA is more commonly found on computers. Attach the LCD-TV to your computer using the included (blue color-coded) VGA cable. The PC audio cable is not included and must be purchased separately.
The subwoofer output is used to attach an external powered subwoofer. Remember to enable this feature from the Audio Menu of the LCD-TV. command is set to On, an internal crossover cuts off the low frequency signal to the built-in speakers.
Select a video source in two ways. You may select a source directly using one of the buttons at the bottom of your remote control: TV, S-VIDEO, AV, YPbPr1, YPbPr2 and PC. Or you may scroll through a list of video sources using the SOURCE button located on top of the LCD-TV. CVBS...
Enjoying Wide-Format Movies As NTSC transitions to HDTV, you may experience a variety of content presented in different aspect ratios. This LCD-TV can scale the incoming video while maintaining the original aspect ratio or stretch the video to use the entire screen.
Note: Plasma users are often advised to use FILL ALL to stretch all content to the edges of the screen in order to reduce burn-in. This LCD-TV has no such problem with burn-in. Use PANORAMIC to expand NORMAL 4:3 aspect ratio content horizontally using a creative non-linear formula.
LCD-TV and remote control. Learn how to use the software features that appear in a menu displayed on-screen. Connector Descriptions There are 4 sets of color-coded connectors on the rear of the LCD-TV: Power; PC inputs and audio outputs; video inputs; and antenna input. Antenna input...
27" Wide-Format LCD-TV User Manual Video Connectors YPbPr1 Input Right audio Left audio YPbPr2 Input Right audio Left audio S-Video Input Right audio Left audio Video Input Right audio Left audio Power Connector Power Input Color Code 5 RCA jacks. Use this set of component video...
LCD-TV. 27" Wide-Format LCD-TV User Manual Description Use this button to switch the LCD-TV between on and standby modes. The power indicator will glow green when the power is on. The power indicator will glow red when the LCD-TV is in standby.
The index number corresponds to the callout number for each button depicted in the illustration. Index Power & Mute Buttons Use this button to switch the LCD-TV between on and standby modes. The power indicator will glow green when the power is on. POWER The power indicator will glow red when the LCD-TV is in standby.
Index 27" Wide-Format LCD-TV User Manual Picture-in- Picture Buttons Use this button to activate and adjust Picture-in-Picture features in conjunction with SOURCE, SWAP, PIP- SIZE and PIP-POS. (See also Picture-in-Picture Description.) Use this button to change the small picture's signal PIP-SRC source.
Press the MENU button again to exit. The SLEEP feature is used to automatically shut off this LCD-TV after a preset period of time has passed. Press the SLEEP button repeatedly to select 0, SLEEP 30, 60, 90 or 120 minutes.
Index 27" Wide-Format LCD-TV User Manual Volume & Channel Control Buttons Use VOL+ and VOL- keys to adjust the audio louder VOL+- and quieter. Use the CH and CH backwards between pre-programmed TV channels. Press 0-9 to select channels from 01 to 125. If you want to select the channel 123, you just press the "1",...
27" Wide-Format LCD-TV User Manual Picture-in-Picture Description Main picture mode 1.You can change the signal source of the main picture through the MAIN MODE of your remote control. The signal source you choose appears on the upper left corner of the screen (diagram 1).
Provides more audio selections. You can also set the audio environment for your LCD display. MISCELLANEOUS (other setups) Provides several options and allows you to set the automatic closing hour, language, and restore the default. 27" Wide-Format LCD-TV User Manual...
WHITE BALANCE RESET < / > For PC DISPLAY CONTRAST BRIGHTNESS COLOR SHARPNESS FOCUS RESET < / > For YPbPr1/YPbPr2/D4 27" Wide-Format LCD-TV User Manual Menu Descriptions Press Contrast picture contrast . Brightness Press Color Temp Press Press of the picture.
27" Wide-Format LCD-TV User Manual V-CHIP CHANGE PASSWORD CH SCAN CATV / AIR CABLE CH ADD/DEL Descriptions CCD (This function is designed for American NTSC system only) Use this function to activate the subtitle function. V-CHIP (grading system) (This function is designed for American NTSC system only) Enter password to activate the MENU of V-CHIP.
VGA. H-Position Press button to adjust the horizontal position of VGA. Press button to adjust the vertical position of VGA. V-Position Reset< / > Press this button to restore all Geometric setups to default. 27" Wide-Format LCD-TV User Manual...
27" Wide-Format LCD-TV User Manual Audio AUDIO VOLUME BASS TREBLE SUBWOOFER SURROUND BALANCE RESET < / > 1. Press the MENU button on the remote controller to display the main menu. 2. Press button on the remote controller to select the main item (Audio) to be adjusted.
Q: Will a progressive scan DVD player provide better video? A: This LCD-TV includes a progressive scan converter that is comparable to the scan-converter built into progressive scan DVD players. Q: What are anamorphic widescreen DVD movies? A: There are two common ways of recording wide format movies on a DVD: letterbox and anamorphic.
Q: Will leaving my LCD-TV on cause the image to degrade? A: No. Unlike plasma TV's, this LCD-TV does not exhibit aging over time. The brightness of the image remains the same. Sufficient airflow is important to maintain a cool operating temperature.
Dimensions with / without stand Package Size Net Weight / Gross Weight Power Source Operative temperature * denotes optional item 27" Wide-Format LCD-TV User Manual 597.12(H) X 335.88(V)mm (diagonal 26.97 inches) 16:9 WIDE 0.1555(H) X 0.4665(V)mm 1280(H) X 720(V) 500cd/m (Typical)
Please provide the mounting kit and these instructions to the installation professional: A. Turn off and unplug the LCD-TV . Place your LCD display face down on a soft clean surface paying particular attention not to scratch the LCD surface, speakers or enclosure.
Keep these instructions in a safe place for future reference. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do no place your LCD-TV near water. Exposing the apparatus to rain, water, moisture or sunlight can severely damage it.
27" Wide-Format LCD-TV User Manual 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 27" Wide-Format LCD-TV User Manual...