D-Vhs Signal Circuit Adjustment; Insert Guide (Tu); Insert Guide (Sp) - Mitsubishi HS-HD2000U Service Manual

2-4. INSERT GUIDE (TU)

SET POSITION : Normal
Remove the following parts before replacing the INSERT
GUIDE (TU). Refer to the corresponding items to install
them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
(Removal)
1. Remove the screw (a) fastening the INSERT GUIDE
(TU) shown in the Fig. 2-4 to remove the INSERT
GUIDE (TU).
(Installation)
1. Install the INSERT GUIDE (TU) shown in the Fig. 2-4.

2-5. INSERT GUIDE (SP)

SET POSITION : Normal
Remove the following parts before replacing the INSERT
GUIDE (SP). Refer to the corresponding items to install
them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
(Removal)
1. Remove the screw (a) fastening the INSERT GUIDE
(SP) shown in the Fig. 2-5 to remove the INSERT
GUIDE (SP).
(Installation)
1. Install the INSERT GUIDE (SP) shown in the Fig. 2-5.
INSERT GUIDE (TU)
a
- 4 -
a
Fig. 2-4
INSERT GUIDE (SP)
Fig. 2-5