Servo Circuit Adjustment; Replacement Of Major Parts; Cleaning Arm, Felt Ring; Stay Plate - Mitsubishi HS-U748 Service Manual

2. Replacement of Major Parts

2-1. CLEANING ARM, FELT RING

SET POSITION : Normal
(Removal)
1. Release the two catches (a) of the CLEANING ARM
shown in the Fig. 2-1 to remove the CLEANING ARM.
2. Release the two catches (b) of the CLEANING ARM
shown in the Fig. 2-1 to remove the FELT RING.
(Installation)
1. Install the FELT RING shown in the Fig. 2-1 to the
CLEANING ARM.
2. Install the CLEANING ARM shown in the Fig. 2-1.

2-2. STAY PLATE

SET POSITION : Normal
(Removal)
1. Remove the two screws (a) fastening the STAY
PLATE shown in the Fig. 2-2 to remove the STAY
PLATE.
(Installation)
1. Install the STAY PLATE shown in the Fig. 2-2.
b
a
a
- 2 -
FELT RING
b
CLEANING
ARM
a
Fig. 2-1
STAY PLATE
a
Fig. 2-2