Fc Holder, Motor Holder; Loading Worm; Loading Motor Assy; Worm Wheel - Mitsubishi HS-HD2000U Service Manual

2-16.FC HOLDER, MOTOR HOLDER,

LOADING WORM, LOADING MOTOR
ASSY, WORM WHEEL
SET POSITION : Normal
(Removal)
1. Release the two catches (a) of the FC HOLDER
shown in the Fig. 2-16-1 to remove the FC HOLDER.
2. Remove the two screws (b) fastening the MOTOR
HOLDER shown in the Fig. 2-16-1 to remove the
MOTOR HOLDER.
3. Remove the two screws (c) fastening the LOADING
MOTOR ASSY shown in the Fig. 2-16-1 to remove the
LOADING MOTOR ASSY and LOADING WORM.
4. Remove the WORM WHEEL.
(Installation)
1. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the LOADING WORM shown in the Fig. 2-16-2.
2. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the WORM WHEEL shown in the Fig. 2-16-2.
3. Install the WORM WHEEL.
4. Install the LOADING WORM, LOADING MOTOR
ASSY to the MOTOR HOLDER.
Note : Tighten the screw (c) shown in the Fig. 2-16-1
after putting the LUG TERMINAL on the screw.
5. Install the MOTOR HOLDER.
6. Install the FC HOLDER.
a
FC HOLDER
c
LUG TERMINAL

WORM WHEEL

WORM WHEEL
Apply GREASE (MULTEMP AC-DM) to the parts
- 12 -

LOADING MOTOR ASSY

b
b
a
LOADING
WORM
MOTOR
HOLDER
Fig. 2-16-1

LOADING WORM

Fig. 2-16-2
.