Oki IP-6620 User Manual page 243

AUTO NOZZ MAP ERROR
Lc Lm C Y K M Gy
PLEASE WARM THE ROOM
AND WAIT FOR A WHILE
ROOM TEMP TOO HIGH
PRINT? OK/CANCEL
DECREASE ROOM TEMP
STANDARD ND BI
DECREASE ROOM TEMP
PLEASE WARM THE ROOM
AN ERROR OCCURRED
PLEASE WAIT
<LCIS model>
NO MORE INK AVAILBLE
USE EXTENSION CHIP
Meaning
An error occurred during automatic nozzle map.
Action
You are advised to follow the message instructions printed on the error
print result of automatic nozzle map.
(See When an error occurs with automatic configuration on
page 113.)
Meaning The ambient temperature is below the printer operating range.
Action Operate the printer within the operating temperature range (15 to 30ºC).
You may also press the CANCEL button to suspend the printing.
Meaning
The ambient temperature exceeds the printer operating range.
Action
Operate the printer within the operating temperature range (15 to 30°C).
Press the OK button to start the printing.
You may also press the CANCEL button to suspend the printing.
Meaning
The ambient temperature exceeds the printer operating range.
Action
Operate the printer within the operating temperature range (15 to 30°C).
The printing resumes automatically after the ambient temperature has
decreased.
Meaning The temperature of the room where the printer is installed is too low.
Action Increase the room temperature to 5°C or above.
Meaning
The temperature of the room where the printer is installed is too high.
Action
Cool the room to 35°C or lower.
Meaning An error was detected during printing.
Action Wait until the error message is displayed.
If no error messages are displayed after five minutes, restart the printer.
Meaning No more ink is available for use.
Action Read an ink amount extension chip with the printer.
243
Troubleshooting