Launching Nw8204 From Dms Host - Siemens NK8000 MP.4.60 Installation Function & Configuration Commissioning Safety Regulations

Maintenance and diagnostics
9
The NW8204 maintenance and diagnostic tool
9.4.1
66
Building Technologies
Fire Safety & Security Products
Since the NW8204 maintenance tool is designed mainly for customer support /
technical use, this guide covers only the most important features used for
troubleshooting.
You access the NW8204 tool by installing and then launching the application on the
host DMS, or by launching the NK8000 Web Server application via Internet Explorer.
To learn how to access the NK8000 Web Server tool, see The NK8000 Web Server
tool [➙ 79].

Launching NW8204 from DMS host

To access the NW8204 tool, do the following:
You need to install the NW8204 maintenance tool (via the DMS8000 DVD) on the

host DMS before proceeding, if it is not already installed.
For NW8204 installation instructions, see NW8204 maintenance and diagnostic
tool [➙ 55].
1. Select Start > Programs > NW8204 > NW8204 (executable file)
Note: On Windows 7 it might be needed to launch NW8204 with "Run as
administrator" (depending on your system security settings).
 You are logged in as 'guest' (default user type) when the NW8204 window
appears.
- To change user type (for example from 'guest' to 'admin'), select Change User
to display the Login window.
Note: There are two ways you can log in to the NW8204 tool:
- Guest user (default): user name = "guest" / password = "guest"
(recommended – read-only privileges).
- Administrative user: call customer support for username and password
(read/write privileges).
Case sensitive – enter letters in lower case only.
A6V10062437_a_en
30.06.2013