DURKOPP ADLER 867-M PREMIUM Additional Instructions page 9

Conversion
Abb. 5: Assembling the Commander Basic/Pro control panel (3)
(4) - Ball head
(5) - Ball socket
6. Slip the clip (8) over the ball head (4).
7. Press the ball head (4) into the ball socket (5), allowing it to slightly
Fig. 6: Assembling the Commander Basic/Pro control panel (4)
(5) - Ball socket
(8) - Clip
8. Slide the clip (8) onto the ball socket (5).
9. Tighten the wing screw (9).
Additional Instructions 867-M PREMIUM - 03.0 - 10/2018
⑤
gyrate.
⑧
④
(8) - Clip
⑨
⑧
⑤
(9) - Wing screw
7