Fig. 7: Assembling the Commander Basic/Pro control panel (5)
(1) - Cable
(10) - Commander Basic/Pro control panel
10. Tighten the Commander Basic/Pro control panel (10) to the control
11. Insert and tighten the cable (1) at the Commander Basic/Pro control
Information
Another option is to assemble the ball socket (5) on the tabletop using the
chipboard screw.
This requires that you pre-drill the hole in the tabletop to prevent damage
to the tabletop surface.
12. Switch on the machine.
The control panel is recognized by the control. The first initialization
13. The machine is ready for operation when the user interface of the Com-
Important
A description of the Commander Basic/Pro control panel software can be
ordered under the part number 0791 867723 EN at Dürkopp Adler.
Alternatively you can also download the description in the download area
at www.duerkopp-adler.com.
8
⑩
⑪
panel holder using the screws (11).
panel (10).
can take up to 15 minutes - DO NOT switch off the machine!
mander Basic/Pro is visible.
①
(11) - Screws
Additional Instructions 867-M PREMIUM - 03.0 - 10/2018
Conversion