Tenda AC1200 User Manual page 59

Step 7 Log in to the web UI of the router again, navigate to Internet Status to check if the
wireless repeating succeeds.
Step 8 Relocate the new router and power it on by referring to the following suggestions.
Between the original router and the uncovered area, but within the coverage of the
−
original router.
Away from the microwave oven, electromagnetic oven, refrigerator.
−
Above the ground with few obstacles.
−
After the new router is set to Client+AP mode:
Do not connect any device to the WAN port of the new router.

The LAN IP address of the router will change. Please log in to the web UI of the router by visiting

tendawifi.com. If there is another network device with the same login domain name
(tendawifi.com) with the router, log in to the upstream router and find the IP address obtained by
the new router in the client list. Then you can log in to the web UI of the router by visiting the IP
address.
---End
To access the internet, connect your computer to the LAN port of the new router, or connect your
smart phone to the Wi-Fi network of the new router.
You can find the Wi-Fi name and password on the Wi-Fi Settings > Wi-Fi Name & Password page. If
the network is not encrypted, you can also set a Wi-Fi password on this page for security.
50