Tenda AC1200 User Manual page 106

Static IPv6 Address
Overview
When your ISP provides you with information including IPv6 address, subnet mask, default
gateway and DNS server, you can choose this connection type to access the internet with IPv6.
Log in to the web UI of the router, and navigate to the IPv6. When the connection type is set to
Static IPv6 Address, the page is shown as below.
Parameter description
Parameter
IPv6 Address
Default IPv6 Gateway
Primary IPv6 DNS
Secondary IPv6 DNS
Access the internet through PPPoEv6
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose IPv6.
Step 3 Enable the IPv6 function.
Step 4 Set the connection type to Static IPv6 Address.
Step 5 Enter the required parameters under IPv6 WAN settings.
Step 6 Click Save.
Description
It specifies the fixed IP address information provided by your ISP.
If your ISP only provides one DNS address, leave the secondary IPv6 DNS blank.
97