Handling The Memory Card - Mitsubishi Melsec-Q Series User Manual

7.1.4 Handling the memory card

(1) Formatting of memory card
Any SRAM or ATA card must have been formatted to use in the CPU module.
Since the SRAM or ATA card purchased is not yet formatted, format it using GX Developer before use.
(Formatting is not necessary for Flash cards.)
For formatting, refer to the following.
GX Developer Operating Manual
Do not format an ATA card other than by GX Developer.
(If formatted using format function of Microsoft
module.)
(2) Installation of SRAM card battery
A battery used to backup for power failure is supplied with the SRAM card.
Before using the SRAM card, install the battery.
Note that the SRAM card memory is not backed up by the CPU module battery only.
Also, the program memory, standard RAM, and latch devices of the CPU module are not backed up by the battery installed
on the SRAM card.
(3) Types of files which can be stored on memory card
For the types of the files that can be stored on each memory card, refer to the following.
Manuals for the CPU module used (Function Explanation, Program Fundamentals)
CHAPTER7 MEMORY CARD AND BATTERY
® ®
Windows Operating System, the ATA card may not be usable in a CPU
1
2
3
4
5
6
7
8
7 - 5