Registering A Desired Paper Size With The Printer Driver - Oki Pro1040 User Manual

⿟
Registering a Desired Paper Size with the Printer
Driver
1
Click [Start] and select [Control Panel]
in [Windows System].
2
Click [View devices and printers].
3
Right-click the [Pro1050 PS] icon, and
then select [Printing preferences].
4
On the [Setup] tab, click [User-defined
paper].
5
Input information about the paper you
want to register.
(1)
Use [Registered user-defined
paper] to select "New paper".
(2)
In the [Paper Name] box, enter a
paper name.
(3)
Select a Media Form to match the
paper.
(4)
Select a Media Type to match the
paper.

Registering a Desired Paper Size with the Printer Driver

(5)
Select a Media Weight to match the
paper thickness.
z If you are unsure of the paper thickness,
select [Medium Light].
(6)
Enter paper size information.
(2)
(1)
Memo
z Input the label length and gap for media that has
gaps and the black mark interval for black mark
media.
z Use a ruler to measure, as accurately as possible,
the actual size of the media, and then input those
values.
z If the label length or the black mark interval is less
than 4 inches, use the following method to measure
the media, and then input values to the first decimal
place to be accurate.
1 2 3
L/10-Gap length(mm)
L/10(mm)
How to Measure the Actual Size of Paper
Measure the length from the leading edge of the
first label (or black mark leading edge) to the
leading edge of the 11th label (or black mark
leading edge). Use this as L (mm).
Divide the length you measured in
calculate the length from the leading edge of the
first label (or black mark leading edge) to the
leading edge of the 2nd label (or black mark leading
edge) to the first decimal place.
Subtract the length of the gap from the length you
calculated in
to the first decimal place.
For media that has gaps, input the value calculated in
in [Label length] and input the gap length in [Gap].
For media that has black marks, input the value
calculated in
- 11 -
Memo
(6)
4 5 6 7 8 9 10
to calculate the length of one label
in [Black Mark Interval].
(3)
(4)
(5)
11
L(mm)
by 10 to